BLSPM - LECTROETCH 210A ELECTROLYTE
- MSDS: BLSPM
- Manufacturer: LECTROETCH CO
- Product Name: LECTROETCH 210A ELECTROLYTE
- National Stock Number: 6850-00N022939
Product Identification
Product ID:LECTROETCH 210A ELECTROLYTE
MSDS Date:06/06/1988
FSC:6850
NIIN:00N022939
MSDS Number: BLSPM
Responsible Party
EAST CLEVELAND, OH 44112
US
Emergency Phone: 216-451-8080
Info Phone: 216-451-8080
Preparer: E A BADT
Cage: 35425
Contractor
Telephone: 216-451-8080
Cage: 35425
Ingredients
THIOCYANIC ACID, POTASSIUM SALT; (THIOCYANATE SALT)
CAS: 333-20-0
RTECS: XL1925000
Fraction By Weight: 6%
CHLORIDE SALTS
Fraction By Weight: 30%
ANIONIC SURFACTANT
Fraction By Weight: 3%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 61%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE KNOWN. CHRONIC: NONE
KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE KNOWN.
Medical Cond Aggravated by Exposure:POSSIBLE SLIGHT IRRITATION TO DRY
OR SENSITIVE SKIN.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. CONSULT MD. SKIN: WASH HANDS THOROUGHLY AFTER
USING. APPLY LUBRICATING LOTION. INGEST: IF TAKEN IN LARGE AMOUNTS,
GIVE EMETI C AND CALL PHYSICIAN.
Fire Fighting
Flash Point:NON FLAMMABLE
Extinguishing Media:NONE REQUIRED. USE MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:FLUSH AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED TO PREVENT
EVAPORATION. KEEP FROM FREEZING. STORE IN A COOL PLACE, OUT OF
DIRECT SUNLIGHT.
Other Precautions:DO NOT CONTAMINATE WITH OTHER MATERIALS. DO NOT MIX
FORMULATIONS UNLESS INSTRUCTED BY THE FACTORY. DO NOT POUR USED
MATERIAL BACK IN BOTTLE.
Exposure Controls
Respiratory Protection:NONE REQUIRED.
Ventilation:LOCAL EXHAUST, MECHANICAL EXHAUST.
Protective Gloves:REQUIRED FOR SENSITIVE HANDS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:USE IN WELL-VENTILATED AREA. WASH HANDS
THOROUGHLY AFTER USE. DO NOT INGEST.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32F, 0C
Spec Gravity:1.12
Solubility in Water:COMPLETE
Appearance and Odor:PURPLISH LIQUID, SLIGHT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
SAME AS ANY AQUEOUS/SALT SOLUTION.
Stability Condition to Avoid:SAME AS ANY AQUEOUS/SALT SOLUTION.
Hazardous Decomposition Products:NONE KNOWN
Conditions to Avoid Polymerization:SAME AS ANY AQUEOUS/SALT SOLUTION.
Disposal
Waste Disposal Methods:SAME AS ANY AQUEOUS/SALT SOLUTION. DISPOSE OF
I/A/W FEDERAL, STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.